ZBox is the importer -
no middle man.
is selling at a realistic, low
buyers are returning
to buy again.
The ZBox good
name is tried and
ZBox freight rates are not
inflated - you pay
Honest service from a business
of highest integrity.
Mark Brereton of Mermaid Beach
built this amazing machine in 2008
Want to turn your Bicycle
into a Motorcycle?
Now you can!
Why pay over $250 for an inferior quality
bicycle engine conversion kit when you can buy our 48cc
Super Z48 - series 3 kits for AUD$235 + plus shipping?
Why is ZBOX Australia
so much less expensive?
WE ARE THE LARGEST AUSTRALIAN
IMPORTER - YOU ARE BUYING AT WHOLESALE DIRECT PRICES
WITH NO MIDDLE MAN.
The kits include everything you will need
to convert a regular V-frame bicycle into a clutch-start
moped. They include a ZBox Super Z48-3 air cooled 48cc
2 stroke engine, fuel tank, throttle & kill switch,
cables, mounting brackets, heavy weight 415 chain and
rear polished chrome sprocket, stylish polished chrome
exhaust, large frame adaptor and user manual.
What will you need?
1. Basic tools.
2. Some mechanical ability.
here if you want a fully assembled motorised bicycle.
is a wholesale importing business - we sell the best engineered bicycle
engines and parts at the lowest price in Australia.
Call us during business
Telephone: (07) 5579
if unattended please
phone 0420 660 866
or email us at: firstname.lastname@example.org
Hi Warren, last week I went to see Don in
Gympie - another new and
very happy customer! Soon we can start a ZBox Club here!
nearly 2 years my bike is still going well. All I had
to get so far
was a sparkplug & a chain clip! - And your website
is looking very
Cheers and good luck, Gunter
QUESTIONS ABOUT ENGINE SIZE?
are 2 basic engine sizes available in Australia; 48cc
(40mm bore x 38mm stroke) and 66cc (47mm bore x 38mm stroke).
The 48cc is sold as a 48cc but the 66cc is most commonly
sold as an 80cc. Honest dealers prefer to sell the 66cc
as a 66cc.
ENGINE KITS ARE NOT MADE - WHAT YOU ARE BUYING IS
66cc ENGINE KIT. IF A GENUINE 80cc ENGINE EVER BECOMES
AVAILABLE - WE WILL SELL IT IF IT DOESN'T RIP THE SPOKES
To help you make sense of it and to know what you are
actually buying, use the following formula to calculate
the correct engine capacity:
volume of a cylinder is calculated by multiplying the
area of the bore of the cylinder by the stroke. The bore
area is calculated as follows:
Bore Area = Bore
x Bore x pi / 4. (pi has a value of 3.14159)
measure engine volume in cubic centimetres although engine
dimensions are often shown in millimetres. You need to
convert any measurements into centimetres before starting
Bore area is therefore 4.0 x 4.0 x 3.14159 / 4 = 12.57
capacity is 12.57(bore area) x 3.8(stroke) = 48cc
It pays to check the bore and stroke of the engine
before you buy.